xTool F2 Ultra UV Ceramic Settings: Tiles & Mugs Chart (2026)
Sourced xTool F2 Ultra UV ceramic settings for glazed tiles and mugs: power, speed, passes and DPI, plus rotary tips, test method and troubleshooting.
Read more6 min read
Category
Material Settings
Starting points for slate, glass, ceramic, and the other materials a 355 nm laser can mark. Every published number still needs a test grid on your own blank.
xTool F2 Ultra UV Slate Settings: Power, Speed & Frequency Chart (2026)
Sourced xTool F2 Ultra UV slate settings for power, speed, passes, lines/cm and frequency, plus a test-grid method, photo tips and troubleshooting.
Read more7 min read
Can a UV Laser Engrave Slate?
Yes. A 355 nm UV laser marks slate as a light grey to white image on dark stone. Here is what changes the result, and where to start on the F2 Ultra UV.
Read more2 min read
Can a UV Laser Engrave Glass?
A 355 nm UV laser can frost glass and, with the right lens, engrave inside crystal. Surface marking and inner engraving are different jobs.
Read more2 min read